Product classification
Masonry mortar
Classification:
- Details
-
Masonry mortar
1. Product overview:
The mortar used for masonry of various blocks such as bricks and stones is called masonry mortar. Junjie masonry mortar is made of high-quality cement, fine aggregates and a variety of high-performance admixtures. It is suitable for the masonry of aerated concrete blocks, fly ash blocks, ceramsite bricks and other lightweight walls and materials with high water absorption.
To
2. Mixing:
According to the ratio of powder: water=1:0.20, stir in a clean container (with mechanical stirring) to form a "paste", and then place it for 3 to 5 minutes and then stir again to use. The stirred mortar should be in Use up within 2~3 hours, mix and use as needed
To
3. Construction:
Spread the mixed "paste-like" evenly on the masonry wall bricks, and apply a certain pressure (percussion) on the wall bricks during masonry to achieve the required bonding balance, according to the wall engineering design specifications Construction is required. The dry-mixed masonry mortar can be jointed with the original slurry on the wall, but it must be hooked along with the construction. The floor ash must be recycled and used in time. It is strictly prohibited to reuse it after the initial setting time. When used in winter, the "Junjie" brand should be added. Antifreeze, the addition amount is 12kg per ton
Dosage: Subject to actual construction usage
4. Typical performance indicators
Item unit index
Item
Unit
index
power level
DM5.0、DM7.5、DM10、DM15、
DM20、DM25、DM30
Consistency
mm
50~120
Stratification
mm
≤25
Water retention
%
≥80
28d compressive strength
MPa
≥Its strength grade
Setting time
h
4、8、12
Impermeability
Meet the design requirements
5. Application technical requirements:
In the environment of temperature below -5℃, our company's products are added with our company's antifreeze, which can be constructed as usual without affecting the quality of the project.
It has good workability, water retention, cohesiveness, fluidity, solidification and durability.
To
Six, packaging and storage:
This product is in a woven bag lined with plastic film, and the weight is 50kg±0.5kg/bag
During transportation, handle with care, prevent rain, and store in a dry place for 3 months
Product inquiry
Contact Us
Beijing New Junjie Building Materials Factory
Address: 360 Xinzhuang Village, Changxindian, Fengtai District, Beijing
Mailbox:807273479@qq.com
Zhuozhou New Junjie New Material Technology Co., Ltd
Address: Baijiazhuang Village West Yihezhuang Town, Zhuozhou City, Hebei Province
Sweep, pay attention to the mobile phone version
Copyright©2020 Beijing Xinjunjie Building Materials Factory All Rights Reserved