Product classification

Decoration mortar

Classification:

Plaster Series

E-mail:

807273479@qq.com

Product inquiry

Related Products

Details

Decoration mortar

1. Product overview:

This product is cement-based colorful decorative powder (color mortar for short), a new type of environmentally friendly decorative material, with natural color texture, soft vision, low cost and easy construction. It can achieve rich and colorful artistic styles through different construction methods. It opens up a new way for the decoration of interior and exterior walls of modern buildings, which meets the requirements of the development trend of "safety, environmental protection, and energy saving".

To

2. Performance

① Strong adhesion, no cracking or falling off, and good adhesion to the substrate.

② The colors are rich and diverse, and users can choose colors according to their preferences.

③ Good air permeability, low water absorption, low shrinkage and good impermeability.

④ The shape is convenient, and a variety of shapes from flat to three-dimensional can be created.

⑤, Scrub resistance, stain resistance, and self-cleaning function.

⑥, Easy to use, fast construction, saving labor and materials, and low cost.

⑦, Non-toxic, non-polluting, safe and environmentally friendly.

To

3. Construction technology:

① Adopt spraying method

Pour the colored mortar and clean water in a weight ratio of 1:0.38～0.4, first pour the water into the mixing tank, then pour the powder into it, and then fully mix it with an electric mixer to form a uniform and fluid mortar. Ready to use. Use a spray gun to spray the glue evenly on the working surface, at least two times (three times is best), and the interval between each spray is about 2 hours.

② Adopt plastering method

Pour the colored mortar and clean water at a weight ratio of 3:1, first pour the water into the mixing tank, then pour the powder into the mixing tank, and then use an electric mixer to fully mix it into a uniform, powder-free paste, and wait for it to settle. Leave it for 10 minutes and stir slightly for better results. Use a spatula to spread the glue evenly and evenly on the base surface. The thickness is generally controlled at about 2 to 3mm. After wiping, it can be rolled into a pattern with various texture tools in about 10 minutes.

To

4. Dosage

The spray application dosage is about 2～2.5kg/m2;

The application amount of smear is about 2～2.5kg/m2;

The construction amount of trowel is about 3～4kg/m2.

To

5. Matters needing attention

①. Confirm the verticality and flatness of the base surface before construction.

②. The freshly mixed glue should be used up within 3 hours. If the glue is crusted on the surface, it should be removed.

③. Never mix the dried glue with water before using it.

④. The eaves should float about 50cm from the wall to avoid direct pollution of roof sewage.

⑤ This product should be constructed under the environment of 5℃～40℃.

⑥. It is forbidden to construct under rain.