Vitrified Brick Binder

Vitrified Brick Binder

1. Product overview

Vitrified tile adhesive is a special adhesive specially developed for the unique characteristics of vitrified tiles, which are high density, low water absorption, and difficult to stick with general adhesives. This product is scientifically formulated with a special high molecular polymer and a variety of inorganic silicates, which further improves the bonding strength and penetration, and overcomes the hollowing and shedding that exist when ordinary adhesive materials are attached to vitrified tiles. The disadvantage is that it is an ideal special bonding material for various vitrified tiles. To

2. Product use

1. Used for exterior wall hanging of vitrified bricks;

2. Paste vitrified tiles in toilets, kitchens, swimming pools, pools, and exterior walls;

3. Paving various decorative materials with high density and low water absorption. To

Three, product features

1. Strong bonding force, full and dense glue, solid and safe bonding of tiles, facing tiles, etc. to the base layer, no cracking, no falling off, resistance to freezing and thawing, no aging, and the bonding strength is 3-5 times higher than that of ordinary cement materials. ;

2. The construction is convenient and fast. The dry powder material can be used by adding water and stirring. The construction does not need to soak the brick to wet the wall, and is not affected by the damp or dry base. The interface treatment, bottoming, leveling and pasting can be completed at one time, and the construction speed is faster than the traditional method 2- 3 times;

3. After pasting, the misplaced tiles can be adjusted within the adjustment range (about 10-20 minutes);

4. Time-saving and labor-saving, economical, long-lasting durability, reduced maintenance, environmental protection and safety, mildew proof, odor proof, non-toxic, harmless to human body

Four, use method

1. Grassroots treatment

Remove grease, floating dust, loose objects and other substances that are not conducive to bonding on the surface of the adhesive layer. Neither the bottom layer nor the facing materials need to be wetted with water, and the bonding surface of the facing materials should be kept clean;

2. Apply the liquid glue to the back of the brick in a rolling manner, and then use the adhesive glue for construction.

3. Preparation of adhesive glue

According to the ratio of binder: water 4:1 (weight ratio), mix and stir to adjust to a suitable consistency slurry, let it stand for 10 minutes, during this time the consistency of the mixture will increase, and then fully stir It can be used after it is restored to its original consistency. In the second stirring, there is no need to add water in general;

4. Pasting method

Use a trowel or toothed scraper to smear the glue on the base surface, knead or rub the tile and other facing materials on the glue and place it on the glue. You can also apply the mixed glue on the back of the tile according to the conventional pasting method. , And then press hard on the wall, straighten it, and scrape off the excess glue. To

5. Jointing after 24 hours.

Precautions

1. The water used for mixing the binder must be clean water (e.g. clean tap water);

2. It is not advisable to add other materials and additives during the process of preparing the adhesive;

3. The adjusted slurry should be used up within 2 hours. To

Storage and packaging

1. This product is non-dangerous, non-toxic, tasteless, does not pollute the environment, and can be transported safely. Avoid rain and bumps to damage the packaging. The product shelf life is 6 months;

2. It should be stored in a cool and dry warehouse, avoid long-term exposure to the air, and strictly prohibit contact with water;

3. Packed in composite bag, 50kg/bag.